Table of Contents
Prepping your home for a fresh coat of paint is a major undertaking. If you’re planning on having your house painted soon, you might need more time to get around to it.
It’s a good idea to wait until you’ve got some time off to do the work. Otherwise, you might work into a frenzy to complete everything in a single day.
For helpful hints, check out this guide on common house painting errors to stay aware of while working on your house painting job.
Read on!
1. Not Properly Preparing the Surface
Before painting, it is essential to clean and prepare the surface to ensure that the paint will adhere properly. This may involve sanding, scraping, or filling any cracks or holes. You should remove any dust, dirt, or debris and wipe down the surface with a degreaser to remove any oils or greases.
Prepare the surface properly to avoid poor paint adhesion, uneven coverage, and a poor-quality finish. Proper surface preparation is critical to achieving a professional-looking paint job.
2. Using the Wrong Type of Paint or Finish
Not all house painting supplies are created equal. It’s important to use the right paint or finish for the specific surface you’re painting and the environment it’s in.
For example, there are better choices than using paint with a high gloss finish on a surface that gets a lot of traffic or is frequently touched, as it would be too slippery. If you are unsure, you could contact A-Choice Painting to help you out.
3. Using a Low-quality Paintbrush or Roller
Cheap paintbrushes and rollers can leave brush or roller marks or shed bristles that get stuck in the paint, ruining the finish. Investing in high-quality paintbrushes and rollers with good bristles can help ensure a smooth, even finish.
Good quality brushes and rollers can hold paint well and release it evenly, bringing a neat finish.
4. Painting in Humid or Hot Conditions
Interior and exterior painting in humid or hot conditions can cause the paint to dry too quickly, leading to brush marks, drips, or an uneven finish. Humidity can cause paint to dry too slowly, leading to problems.
It’s best to paint when the humidity is low, and the temperature is cool to minimize the risk of these issues. Painting under direct sunlight can cause rapid drying, which will not allow enough time to level the paint, so try to avoid direct sunlight.
5. Not Using Enough Paint
Applying too little paint can lead to an uneven finish and the need for multiple coats. It’s important to use enough paint to achieve full coverage and ensure that the surface is properly protected.
Using enough paint can also make the paint film too thin, making it more susceptible to chalking, fading, or peeling over time.
Avoid the Common House Painting Errors Starting Today
Remember to take safety precautions when painting your home and use the best quality supplies. Remove old paint, buy the right tools, and use painter’s tape. Avoid over-brushing, roller spatter, and overflowing paint trays.
Doing these steps will help you avoid common house painting errors and ensure your result is a beautiful, smooth painting. For more tips and tricks, call your local professional painters today!
We hope you found this article useful. If you did, be sure to check out our blog for more helpful content like this.